Miele WTH 120 WPM User Manual

DRYING
57
5. Start the programme
 Press the flashing Start/Stop button.
The door will lock (the  symbol will
appear in the display to show this) and
the drying programme will start.
The programme status will appear in
the display.

2:15Drying
h
The washer-dryer will keep you updated
on the programme status and the time
remaining for the programme to run.
If a delay start time has been selected,
this will count down in the display until
the programme starts.
The drum lighting switches off once the
programme has started.
6. At the end of a programme
The door is still locked during the anti-
crease phase and the following will
appear alternately in the display:

Anti-crease/Finish

Press Start/Stop
 Press the Start/Stop button.
The door will unlock.
If you have unloaded the drum
during the anti-crease phase make
sure you spread it out to cool down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull open the door.
 Unload the drum.
Items left in the dryer could be
damaged by overdrying when the
dryer is next used.
Check that all items have been
removed from the drum.
 Switch the washer-dryer off.
See "After each washing and drying
programme" in "WASHING" AND
"DRYING"

Miele WTH 120 WPM Specifications

General

Brand	Miele
Model	WTH 120 WPM
Category	Washer/Dryer
Language	English