Before using for the first time
21
Start the calibration
programme
The following message will in the
display:
Open and run Cottons 90°C without
laundry.
Touch the sensor repeatedly until
you have read all the rows of text.
The OK sensor will light up.
Confirm the message with the
OKsensor.
It is important to calibrate the machine
to ensure optimum water and energy
usage, as well as optimum washing
and drying results.
To do this the Cottons 90°C
programme must be run without
laundry and without detergent.
No other programmes can be started
until calibration has been carried out.
Open the stopcock.
Turn the programme selector to
Cottons.
Do not change any other programme
settings.
Press the Start/Stop button.
The calibration programme will start.
At the end of the programme the
following message will appear in the
display:
Set-up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washer-dryer off with the
button.
To Next Page
Loading...
Need help?
General
