WASHING
35
To omit the final spin (Rinse hold)
Use the Spin speed button to select
the (rinse hold) setting.
The laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
To start the final spin:
Use the spin speed button to select
the required spin speed and confirm
your choice withOK.
The laundry will be spun at the speed
you have set.
or
Start the final spin with the Start/Stop
button.
The laundry will be spun at the
maximum spin speed for the selected
wash programme.
To end the programme:
Use the spin speed button to select
the 0 rpm setting (without spin) and
confirm your choice with OK.
The water will drain away.
To omit rinse and interim spin and
the final spin
Press the Spin speed button.
Select the 0 rpm setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
To Next Page
Loading...
Need help?
General
