Installation and connection
100
The Miele water protection
system
The water protection system protects all
parts of the washer-dryer from water
damage.
The system consists of three main
components:
– the inlet hose
– the electronic unit, and the drainage
and overflow protection
– the drain hose
Inlet hose
– Protects the safety valve from
bursting
The inlet hose can withstand
pressure of more than 14,000 kPa.
– Protective sleeve
The inlet hose has a protective sleeve
which is made from metal braiding as
a “second skin” to protect the hose
against damage.
Electronic unit and machine housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves. This shuts off the water intake
and prevents any more water from
flowing into the machine. Water in
the suds container is pumped away.
– Overflow protection
This prevents the machine from
taking in too much water and
overflowing. If the water level
exceeds a certain level, the drain
pump switches in and pumps the
excess water away.
Drain hose
The drain hose is protected by a
ventilation system which prevents the
machine from being emptied
completely.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
