Delay start/SmartStart
74
SmartStart
With the SmartStart function (only
functional in selected countries) you
can define a time period during which
the washer-dryer will be started
automatically by a signal, for instance
to make use of cheaper electricity
tariffs.
If your energy provider offers this
service, they will send a signal
whenever the electricity tariff is
inexpensive. This signal will activate the
washer-dryer to start the programme.
You can define a period (from 15
minutes to 24 hours) by which the
programme must be started. During this
period, the washer-dryer waits for the
signal from the energy supplier. If no
signal is received during this time, the
washer-dryer starts the programme
once the time period has elapsed.
Setting the timeframe
If you have activated the SmartStart
function in Settings, SmartStart will
appear in the display instead of Start in
when you press the Delay start button
(see “Settings - Miele@home,
SmartStart”).
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the and sensors to enter the
hour and confirm your entry with the
OK sensor.
The hour will be saved and the minute
number block will be highlighted.
Use the and sensors to enter the
minutes and confirm your entry with
the OK sensor.
Press the Start/Stop button to begin
the programme with SmartStart.
The following will appear in the display:
The selected programme will start
automatically as soon as the energy
provider has sent the signal, or the
latest calculated start time has been
reached.
The procedure for changing or deleting
the SmartStart function is the same as
the one described for the Delay start
function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
