Settings
109
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language
(Sprache in German) acts as a guide in
case a language which is not
understood has been set.
The language selected is saved.
TwinDos
You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washer-dryer is pre-set as standard
for UltraPhase1 and UltraPhase2 for
hardness range I ().
The settings must be changed in the
electronics:
– for water hardness rangeII() and
water hardness rangeIII().
– when changing to a different
detergent or fabric softener. TwinDos
containers (optional accessories) are
required for this.
Please refer to the UltraPhase
cartridges for correct dosage amounts
for each water hardness range.
Adjusting the dosage amount
Use the and sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
Set the dosage for UltraPhase 2
Confirm the message with the
OKsensor.
Use the and sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
The dosage amount has been adjusted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
