Drying
56
Selecting drying
Touch theWashing and Drying sensor
until just theDrying indicator light
remains on.
The Washing indicator light must not
be lit up as this would mean that the
relevant wash programme would
begin before the drying process.
The maximum load for the drying
programme selected will appear in the
display (dry laundry weight). This will
then be replaced by the standard
display.
3. Loading the drum
Opening the door
Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with
laundry.
Load the laundry loosely in the drum.
Overloading places a strain on the
textiles and affects drying results.
Observe the maximum loads listed in
the Programme chart.
Closing the door
Make sure that no items are caught
between the door and the seal.
Shut the door with a gentle swing.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt
during the drying programme and
cause damage to the machine and
the laundry.
These dispensing aids must be
removed from the laundry before
drying.
The mains water tap must be kept
open for drying.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
