Mindray CAL 8000 User Manual

Data Managing Unit (DMU)
10-9
 Checking the reagent information of selected sample
In this tab, you can check the information of the reagents used for the analysis of the selected
sample. For open-reagent models, if the user does not input the reagent information after
replacing a new container, the information here will be null.
10.5.2 Tracing Samples Corresponding to Specified Batch of
Reagent/Control
 Tracing samples corresponding to the specified batch of reagent
1.
In “Review” screen, click the button, and the dialog box
below pops up.
2.
1) Select the “Reagent” radio button;
2) Select desired reagent name in the “Reagent” pull-down list;
3) Specify the desired “Lot No.” of the reagent.
3.
Click “OK” to close the dialog box, and the software will search for matching samples
and display them in the table area.
 Tracing samples corresponding to the specified batch of control
1.
In “Review” screen, click the button, and the “Sample
Traceability” dialog box pops up.

Mindray CAL 8000 Specifications

General

Brand	Mindray
Model	CAL 8000
Category	Measuring Instruments
Language	English