Passport 12/Passport 8 Operator’s Manual 3-5
NOTE
To completely disconnect the power supply, unplug the power cord.
3.4 Using the Knob
Rotate the knob clockwise or counterclockwise to move the cursor.
Press the knob to select one item, such as accessing a menu or confirming the selection.
3.5 Using Keys
The monitor has three types of keys:
Softkey: A softkey is a graphic key on the screen, giving you fast access to certain menus or functions. The
monitor has two types of softkeys:
Parameter keys: Each parameter area can be seen as a softkey. You can enter a parameter setup menu by
selecting its corresponding parameter or waveform area.
QuickKeys: QuickKeys are configurable graphical keys, located at the bottom of the main screen. For details,
refer to the section 2.6 QuickKeys.
Hardkeys: A hardkey is a physical key on a monitoring device, such as the [Main Menu] hardkey on the monitor’s
front panel.
Pop-up Keys: Pop-up keys are task-related keys that appear automatically on the monitor screen when needed.
For example, the Confirm pop-up key appears only when you need to confirm a change.
3.6 Using the Touchscreen
Select screen items by pressing them directly on the monitor’s screen. You can enable or disable touchscreen
operation by pressing and holding the [Main Menu] QuickKey for 3 seconds. A padlock symbol
displays if
touchscreen operation is disabled.
3.7 Using the On-screen Keyboard
The on-screen keyboard enables you to enter information.
Use the
key to delete the previously entered character.
Use the
key to toggle between uppercase and lowercase letters.
Select
to confirm what you have entered and close the on-screen keyboard.
Select to access the symbol keyboard.
Select to exit the symbol keyboard.
To Next Page
Loading...
Need help?
General
