P/N: H-046-005847-00 Rev 3.0
8
Passport
®
Quick Reference Guide
DPM Central Station Interface: Selecting Start NIBP Measurement on the
DPM Central Station will initiate a NIBP measurement on the Passport 8 or
Passport 12 bedside monitor.
Set A Non-Invasive Blood Pressure Measurement Interval
The Passport 8 or Passport 12 bedside monitor allows the clinician to set an
interval for a NIBP measurement to be obtained automatically.
To set an automatic interval on the Passport 8 or Passport 12 bedside monitor:
a. Select NIBP measurement (quick key) and Select interval
Or
a. Select NIBP >> by selecting NIBP tile or from Parameters menu (
or Main Menu quick keys)
b. Select Interval and adjust value using up and down arrows
c. Select Main Menu (quick key) or to return to the main display
DPM Central Station Interface: Selecting Interval in the NIBP menu (ViewBed
Tab) on the DPM Central Station allows the clinician to set an automatic
interval on the Passport 8 or Passport 12 bedside monitor.
To stop the current NIBP measurements on a patient on the Passport 8 or
Passport 12 bedside monitor:
a. Select NIBP on the front panel of the monitor during the NIBP
measurement.
DPM Central Station Interface: Selecting Stop NIBP Measurement on the
DPM Central Station will stop a NIBP measurement on the Passport 8 or
Passport 12 bedside monitor.
To stop all NIBP measurements on a patient on the Passport 8 or Passport 12
bedside monitor:
a. Select Stop all measurements (quick key)
Or
a. Select NIBP Setup>> by selecting NIBP tile or from Parameters menu
( or Main Menu quick keys)
b. Select Stop All
c. Select Main Menu (quick key) or to return to the main display
To Next Page
Loading...
Need help?
General
