P/N: H-046-005847-00 Rev 3.0
4
Passport
®
Quick Reference Guide
STANDBY
Enter Standby
The Standby function allows the clinician to suspend monitoring on a patient.
While in standby, the patient is not monitored; however, all data and settings
are preserved.
To place a patient into Standby on the Passport 8 or Passport 12 bedside
monitor:
Select the STANDBY (quick key) and select Yes to confirm. To remove a
patient from Standby and resume monitoring on the Passport 8 or Passport
12 bedside monitor select any key on the Passport 8 or Passport 12 bedside
monitor.
DPM Central Station Interface: Selecting Standby on the Passport 8 or
Passport 12 bedside monitor automatically places the DPM Central Station in
standby. Select any key on the Passport 8 or Passport 12 bedside monitor to
remove patient from Standby. Selecting Standby in the patient’s drop down
menu will remove patient from standby.
Panorama Central Station Interface: Selecting Standby on the Passport
8 or Passport 12 bedside monitor automatically places the Panorama
Central Station, WorkStation, and ViewStation in standby. Selecting Bedside
and Panorama Standby on the Panorama Central Station or WorkStation
automatically places the bedside monitor and ViewStation in standby. Select
any key on the Passport 8 or Passport 12 bedside monitor to remove patient
from Standby as a patient cannot be removed from Standby on the Panorama
Central Station.
RECORD
Real-Time Waveforms
To record a strip on a patient on the Passport 8 or Passport 12 bedside
monitors’ integrated recorder select Record on the monitor’s front key pad.
To Next Page
Loading...
Need help?
General
