P/N: H-046-005847-00 Rev 3.0
10
Passport
®
Quick Reference Guide
ALARMS
Adjust Alarm Limits
The Alarm Setup tab allows the clinician to configure alarm limits and alarm
responses on the Passport 8 or Passport 12 bedside monitors.
To adjust a patient’s alarm limit on the Passport 8 or Passport 12 bedside
monitor:
a. Select parameter’s waveform or numeric tile to open parameters Setup
menu
b. Select Alarm Setup >>
c. Select High or Low limit value and adjust using the up and down arrows
d. Select Off in the limit value area to disable the parameter’s alarm limit(s)
e. Select Main Menu (quick key) or to return to the main display
Or
a. Select Alarm Setup>> from (quick key) or Main Menu (quick
key)
b. Select Parameters tab to change parameters or ST tab to change ST
limits
c. Scroll and select the parameter
d. Select High or Low limit value and adjust using the up and down arrows
e. Select Off in the limit value area to disable the parameter’s alarm limit(s)
f. Select Main Menu (quick key) or to return to the main display
DPM Central Station Interface: Changing alarm limits on the DPM Central
Station automatically change alarm limits on the Passport 8 or Passport 12
bedside monitor. Changing alarm limits on the Passport 8 or Passport 12
bedside monitor will automatically change alarm limits on the DPM Central
Station.
Panorama Central Station Interface: Changing alarm limits on the Panorama
Central Station or WorkStation will automatically change alarm limits on the
Passport 8 or Passport 12 bedside monitor. Changing alarm limits on the
Passport 8 or Passport 12 bedside monitor will automatically change alarm
limits on the Panorama Central Station and WorkStation.
To Next Page
Loading...
Need help?
General
