P/N: H-046-005847-00 Rev 3.0
15
Passport
®
Quick Reference Guide
g. Select Transfer
1. Select Trends to transfer patient’s trended data (configurable)
2. Select Alarm Events to transfer patient’s alarm events
3. Select Alarm Limits to transfer patient’s alarm settings
h. Select Yes to confirm
i. Confirm Transfer from storage medium successful message is displayed
j. Select to unload (release USB Flash Drive) and select OK
k. Remove USB Flash Drive
*If enabled
DPM Central Station Interface: Transferring patient data from one Passport 8
or Passport 12 bedside monitor to another Passport 8 or Passport 12 bedside
monitor will not transfer data within the DPM Central Station. Transferring
data within a DPM Central Station or to a different DPM Central Station may
affect the Passport 8 or Passport 12 bedside monitor.
Panorama Central Station Interface: Transferring patient data from one
Passport 8 or Passport 12 bedside monitor to another Passport 8 or Passport
12 bedside monitor will not transfer data within the Panorama Central Station.
Transferring data within a Panorama Central Station or to a different Panorama
Central Station may affect the Passport 8 or Passport 12 bedside monitor.
HEMODYNAMIC MONITORING
Initiate A Cardiac Output Measurement
Cardiac Output (C.O.) is the amount of blood ejected from the left ventricle
each minute, expressed in liters per minute (l/min). Cardiac Index (CI) is the
Cardiac Output divided by the patient's body surface area.
To initiate a Cardiac Output measurement on the Passport 8 or Passport 12
bedside monitor:
a. Insert IBP/C.O. Module
b. Connect the C.O. cable to the C.O. connector on the monitor
interconnecting the C.O. Module, PA Catheter, and injectate.
c. Select C.O. Setup >> by selecting C.O. tile, (quick key), or from
To Next Page
Loading...
Need help?
General
