P/N: H-046-005847-00 Rev 3.0
30
Passport
®
Quick Reference Guide
Product Name Product Type Ingredients
PDI Sani-Cloth® Plus
Germicidal Disposable
Cloth
Wipes n-Alkyl dimethyl ethylbenzyl
ammonium chlorides 0.125%,
n-Alky dimethyl benzyl ammonium
chlorides 0.125%
PDI Super Sani-
Cloth®Germicidal
Disposable Wipe
n-Alkyl dimethyl ethylbenzyl
ammonium chlorides 0.25%,
n-Alkyl dimethyl benzyl
ammonium chlorides 0.25%,
Isopropyl Alcohol 55.0%,
VIRAGUARD Hospital
Surface Disinfectants
Isopropanol 70%,Other ingredients
30%
Note: For equipment with the symbol , all the listed cleaning and
disinfecting agents are available for use. For equipment without the symbol
, only the cleaning and disinfecting agents marked with “*” are available
for use.
To clean the equipment:
a. Shut down the monitor and disconnect it from AC power.
b. Clean the display screen with wipes or a soft cloth moistened with one of
the cleaning agents listed in the table above.
c. Clean the exterior surface of the equipment or module with wipes or a
soft cloth moistened with one of the cleaning agents listed in the table
above. Avoid wetting the pins and metal parts.
d. Wipe off all the residue with a dry cloth.
e. Dry your equipment in a ventilated, cool place.
Disinfecting the Main Unit/Module
Disinfect your equipment as required in your hospital's servicing schedule
using one of the disinfecting agents listed in the table above. Cleaning
equipment before disinfecting is recommended.
To Next Page
Loading...
Need help?
General
