10-12 Patient Data Management
10.5 Recycle bin
The recycle bin is used to store deleted patient data, exam data and images.
Tap in the top-right corner of the screen and select to enter the Patient Recycle Bin
screen.
To recover deleted patient data
NOTE: if the capacity of the recycle bin exceeds 200. The system reminds the user to clean.
Follow the procedures to clean the recycle bin.
1. Select items in the list. Select operations:
Tap [Restore Items] to restore the item to iStation.
Tap [Delete] to delete the item permanently. The item can never be restored again.
2. Tap [Done] to exit the screen.
To set maximum number of days for deleted data to be kept in the recycle bin
NOTE: The patient exams which exceed the preset maximum will be deleted and unrecoverable, it
is recommended to perform patient data backup before enabling this function to avoid data loss.
1. Input the desired number besides “Maximum number of days to be kept”.
If the input box is left blank, the feature will not be enabled.
Only the whole number ranging from 1 to 365 can be input.
2. Tap [Modify].
10.6 iStorage
iStorage is used to save image files and measurement reports to the remote PC server.
Select [Setup] ->[Network] ->[Network Preset] to set the iStorage settings (see chapter “12.3.3.1
iStorage Preset” for details).
1. Enter the iStation screen. Select one (or more than one) patient data or image in the local data
source.
2. Tap [Send To].
3. Select [iStorage] in the Send To dialog box on the left and select the PC server on the right.
4. Select PC transfer format to send the report.
5. Tap [Send] to start sending.
10.7 Print
10.7.1 Print Setting
For printer connection and driver installation, please refer to “3.7 Installing a Graph/Text Printer”
chapter.
Print Service Setting
1. Select [Setup] ->[System] ->[Peripheral] and select an existing printer service from the list on
the upper part of the screen.
2. Select the printer type in the Property box.
3. Set printing properties.
4. Tap [Save] to confirm the setting and exit the preset page.
See chapter “12.1.10 Peripheral Preset” for details about printer selection and print service setting.
To Next Page
Loading...
Need help?
General
