Mitel 622 DECT User Manual

Using the display and operating elements
Mitel 622 DECT Phone 29
eud-1720/1.0 – R3.0 – 08.2015
Enter letters
You can also use the digit keys to enter letters and special characters. A number of letters
and special characters are assigned to each key.
To enter letters using the digit keys, you need to be in text mode. The text mode is acti-
vated automatically if the phone is expecting a text input. You can switch back and forth
between number mode and letter mode during your input.
Switching between upper and lower case
You want to switch between upper and lower case while making an input in text mode.
Upper-case input is automatically activated when the first letter is entered. The text mode
then automatically switches to lower-case input. You can use the softkey to switch manu-
ally between upper-case and lower-case input.
Correcting your input
You notice you have entered a wrong digit or character. You can either delete the input
one character at a time or cancel the entire input.
Moving the cursor
You want to go to a certain character for an input or correction.
With the navigation key you can move the cursor to the left or right.
abc-->123
Switching between number mode and letter mode during your
input:
Press the abc-->123 or 123-->abc softkey.
a-->A
Switching between upper case and lower case in text mode:
Press the a-->A or A-->a softkey.
To delete the last character:
Press the Correction key.
Exit editor without changes:
Press the End key.
Move the cursor with the horizontal navigation key.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English