Mitel 622 DECT User Manual

96 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Personalizing your phone
Formulating functions
This section explains how to express and execute an individual function, for exam-
ple call forwarding, using function commands and function codes.
Function commands, function codes
You can use the predefined selection to allocate functions to a configurable key (see
chapter
"Storing a function on a key - function key", page 92). You can also write your
own functions using function commands and function codes (select Free configurable
function). The function commands are listed here; the function codes can be found in the
User's Guide User Guide Function Codes on the
Mitel DocFinder.
You can use function commands to define a function to suit your personal requirements.
A function can consist of one or more function commands, function codes, and the phone
number.
The following function commands are available:
"I" Seize line
"H" Seize line in hands-free mode
"X" Disconnect
"P" Pause 1 second before the next operation
"N" Use the phone number entered in call preparation
"." Control key function (up-circuit system)
"Z" Activate/deactivate DTMF mode
"R" Use the phone number last dialled
"Y" Disconnect and reseize the line
Other formulation examples:
"IR" Seize line ("I"),
Dial phone number last dialled ("R")
"I201" Seize line ("I") and dial phone number 201
"I*21201X" Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English