42 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Supplementary features
Receiving an announcement
Your phone rings once and then automatically initiates the announcement. The display
shows . You will be addressed via your loudspeaker.
You have the following possibilities for answering the announcement:
• You can stop the announcement.
• You can listen to the announcement as a phone call.
• Depending on the system configuration you can answer the announcement directly in
intercom, without having to press a key.
Private call with PIN
You want to make a private call on your phone or on a third-party phone.
With the aid of your PIN you can use any phone to make an external call with your own
personal settings, even if that phone is locked for external calls. The called party's display
shows your personal phone number and not the number of the phone from which you are
making your call. Any call charges incurred will be charged to you.
The call number dialled is not stored in the last-number redial list.
To continue the announcement as a phone call:
Press the Call key.
➔You are now connected to the person who initiated the announcement.
To stop the announcement:
Press the End key.
Answering the announcement in intercom:
Answer the announcement directly without pressing a key.
<Function code>
1. Enter function code #46 followed by your internal call number.
2. Enter your PIN.
3. Enter the external call number directly, without the exchange access
digit.
Press the Call key.
➔The phone is now enabled. The external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
"Changing the User PIN", page 82 or use the func-
tion code *47 (see User Guide Function Codes on the
Mitel DocFinder).
If you have forgotten your PIN, your system administrator can reset it to
the default setting.
To Next Page
Loading...
Need help?
General
