Mitel 622 DECT User Manual

Personalizing your phone
Mitel 622 DECT Phone 71
eud-1720/1.0 – R3.0 – 08.2015
Configuring cordless phone functions
This section explains the procedure for making settings on your cordless phone.
Switching the cordless phone on/off
You want to switch your phone on or off.
Locking/unlocking the keypad
You leave your workstation and want to avoid accidentally pressing your phone keys.
You can lock the keypad against unintentional actuation. You can choose whether you
want the keypad to be unlocked automatically when you receive a call or whether you pre-
fer to unlock the keys manually in any case.
Switching the phone off:
Keep the End call key pressed down for approx. 2 seconds and answer
Ok to the safety prompt.
➔The phone is switched off.
Or:
Function is also available via the menu: Menu > Settings > General >
Switch off.
Notes:
• You cannot switch the phone off in a call.
• When the phone is switched off, incoming calls are stored in the call
list.
Switching the phone on:
Pick up the phone from the charging unit and keep the End call key
pressed down for approx. 2 seconds.
➔The phone is switched on.
Note:
If you cordless phone cannot find a system, the display shows "No sys-
tem". You can switch to an available system using Menu > Settings >
System > System registrations (see chapter l
"Managing communication
systems", page 84).
Locking the keypad:
Keep the hash key pressed down for approx. 2 seconds.
➔The keypad is locked.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English