72 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Personalizing your phone
Locking your phone
You need to leave your desk and want to ensure that no-one can alter your phone's set-
tings, look at your private data, or make outside calls from your phone.
You can lock your phone with a PIN consisting of two to eight digits. You can change it via
menu (see the chapter
"Changing the User PIN", page 82) or with the function code *47
(see User Guide Function Codes on the
Mitel DocFinder).
You can lock either just the settings menu (Lock settings) or the entire phone (Lock
phone). With Lock phone your private data cannot be viewed and external calls can only
be made from your phone in accordance with the system settings. With Free all the set-
tings and data are freely accessible.
Unlocking the keypad:
Press the Unlock softkey and the hash key.
➔The keypad is unlocked.
Auto key lock
Unlocking the keypad automatically:
Enable the Auto key lock via Menu > Settings > General.
➔The keypad is locked automatically after approx. 10 seconds, is dis-
played. The keypad is automatically unlocked when you receive a call.
The lock is reactivated immediately after the end of the call.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
Barring
Scroll to Barring and press the Select softkey.
➔You are prompted to enter your PIN.
<PIN>
Enter the PIN and confirm with the Ok softkey.
<Barring>
Select the barring you want and enable with the Select softkey.
➔The phone is now locked; is displayed.
➔To lock all your phones, execute the function code *33* <PIN> # (see
User Guide Function Codes on the
Mitel DocFinder).
To Next Page
Loading...
Need help?
General
