169
U
SER ACCESS CONTROL
CHAPTER 5 CONFIGURATION
NOTE: To prevent unauthorised access to the SMB Controller Manager, it is necessary to modify the
default password during first access.
Default user account in emergency mode
To access the SMB Controller Manager in emergency mode enter the following:
NOTE: The default password for emergency mode cannot be changed.
WebAdmin User accounts and authorization profiles
A user's authorizations are regulated by authorization profiles, which are assigned to the user accounts.
User accounts
Default user account for initial access
When a new communication server is opened or after a first start, the default user account (admin) and
several authorization profiles are created. The default user account is linked with the authorization profile
Administrator. This authorization profile is assigned the administration rights for the User access control
for Audio services and for WebAdmin at the Administrator authorisation level.
The required user accounts and authorization profiles can be set up using the default user account.
To access the default user account (Default User Account) enter the following:
NOTE: To prevent unauthorised access to the communication server, it is necessary to modify the default
password during first access. For password selection and input, see Password syntax
.
Other predefined user accounts
Furthermore there are predefined user accounts for the Mitel Dialer for MiCollab, for OpenMobilityMan-
ager (OMM), and for CloudLink gateway.
You can see the predefined user accounts in the User account ( =a7) view.
NOTE: The predefined user accounts cannot be deleted.
Personal user accounts
Table 5.1:Default user account SMB Controller Manager in normal mode
User name admin
Password admin
Table 5.2:Default user account in emergency mode
User name admin
Password admin
Table 5.3:Standard user account and standard password
User name admin
Password password
To Next Page
Loading...
Need help?
General
