30
OCH610G
<How to operate>
1 Press POWER ON/OFF button.
2 Press the operation MODE button to display AUTO.
3 Press the TEMP. button to set the set temperature.
NOTE: The set temperature changes 1°F when the or
button is pressed one time. Automatic 67 to 83°F
<How to operate>
1 Press ON/OFF button.
2 Press [F1] button to display AUTO.
3 Press [F2] [F3] button to set the set temperature.
NOTE: The settable temperature range varies with the model
of outdoor units and remote controller.
8-5. AUTO OPERATION [AUTOMATIC COOL/HEAT CHANGE OVER OPERATION]
Control Mode Control Details Remarks
1. Initial value of
operation mode
HEAT mode for room temperature < Set temperature
COOL mode for room temperature
]
Set temperature
2. Mode change +($7PRGHĺ&22/PRGH
Room temperature
]
Set temperature + 3°F or 3 minutes have passed.
&22/PRGHĺ+($7PRGH
Room temperature
[
6HWWHPSHUDWXUHí)RUPLQXWHVKDYHSDVVHG
3. COOL mode Operates as it would in COOL operation.
4. HEAT mode Operates as it would in HEAT operation.
8-6. WHEN UNIT IS STOPPED CONTROL MODE
Control Mode Control Details Remarks
1. Drain pump 1-1. Drain pump control
7KHGUDLQSXPSWXUQV21IRUWKHVSHFL¿HGDPRXQWRIWLPHZKHQDQ\RIWKHIROORZLQJ
FRQGLWLRQVKDVEHHQVDWLV¿HG
1
ON for 3 minutes after the operation mode is switched from COOL or DRY to another
operation mode (FAN).
2
21IRUPLQXWHVDIWHUWKHÀRDWVZLWFKLVVXEPHUJHGLQWKHZDWHUZKHQWKHÀRDWVZLWFK
control judges the sensor is in the water.
1-2. Float switch control
• Float switch control judges whether the sensor is in the air or in the water by
WXUQLQJWKHÀRDWVZLWFK212))
,QWKHZDWHU'HWHFWHGWKDWWKHÀRDWVZLWFKLV21IRUVHFRQGV
,QWKHDLU 'HWHFWHGWKDWWKHÀRDWVZLWFKLV2))IRUVHFRQGV
• Operates as it would
in COOL operation.
MENU
ON
OFF
RETURN
SELECT
HOLD
.