Mitsubishi Electric NZ2GFSS2 16DTE S1 User Manual

8 FUNCTIONS
8.8 Functions Available When Extension Modules Are Connected
117
8
8.8 Functions Available When Extension Modules Are
Connected
The functions of the safety extension module or the standard extension module are available when the extension module is
connected.
Functions that can be used when a safety extension module is connected
The following lists the functions that can be used when a safety extension module is connected.
• Connect the safety extension module (NZ2EXSS2-8TE) to the main module (NZ2GFSS2-32D-S1).
• Before connecting a safety extension module or replacing an existing safety extension module with a new
one, turn off the module power supply. If a safety extension module is connected or removed while the
module power supply is on, an error occurs in the safety remote I/O module. For the error state, refer to the
list of error codes. ( Page 137 List of Error Codes)
• When a safety extension module is replaced with a new one, write the parameters to the module again from
the engineering tool.
Function Reference
Output function Page 89 Safety Output Function
Output diagnostic function Output dark test function Page 105 Output dark test function
Output read-back function Page 107 Output read-back function

Mitsubishi Electric NZ2GFSS2 16DTE S1 Specifications

General

Brand	Mitsubishi Electric
Model	NZ2GFSS2 16DTE S1
Category	I/O Systems
Language	English