122
10 TROUBLESHOOTING
10.1 CC-Link IE TSN/CC-Link IE Field Diagnostics
10 TROUBLESHOOTING
This chapter describes the troubleshooting of the safety remote I/O module.
10.1 CC-Link IE TSN/CC-Link IE Field Diagnostics
For details on CC-Link IE TSN/CC-Link IE Field diagnostics, refer to the following.
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
Remote reset
Perform the following operations to reset the selected safety remote I/O module through the remote operation.
1. Select a device station to be reset and click the [Remote Operation] button.
2. Follow the instructions on the window and click the [Yes] button.
3. Follow the instructions on the window and click the [OK] button.
To Next Page
Loading...
Need help?
General
