12-7
3. Hold the tilt grip and raise the cab until the end
of cab stay engages with the notch of the
lock lever . The cab is secured when they are
engaged.
4. Still holding the tilt grip, insert the stopper into
the notch of the lock lever.
3 Lowering the cab
1. Release the stopper and retain it in the clip .
WARNING
• Be sure to fit the stopper into the notch in
the lock lever to prevent the cab from
dropping.
• Do not raise the cab holding lever B or
lever C. Failure to observe this precaution
can lead to the cab-tilt mechanism being
damaged or to incomplete locking when
the cab is lowered back down.
WARNING
• Before lowering the cab, make sure that
you have not left rags, tools, etc. in the
engine compartment. Flammable objects
left inside the engine compartment can
cause fires.
• The cab could come down too quickly if
there are heavy objects inside or on the
roof deck. Always lower the cab slowly
while supporting it.
Z18601
Z16802
Z13283
FE_FG.book Page 7 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
