5-14 Switches and controls
CAUTION
• Shifting from a forward gear to the reverse
gear or vice versa, should be done only after
the vehicle has come to a complete stop.
When backing up, always double check to
make sure that there is nothing in your path.
• When the gearshift lever is in the neutral
position, never keep your hand on it. Such
forward or backward pressure on the lever
could cause the transmission to malfunc-
tion, especially if you use a gearshift lever
extender because the gearshift lever is very
likely to move even if the pressure on the
extender is slight.
• Depress the clutch pedal fully whenever
changing gear. If you do not depress the
pedal completely, the clutch will slip and the
clutch disc will be damaged, which could
lead to an accident.
• The shift pattern is inscribed on the top of gear-
shift lever.
• When the gearshift lever is placed in the reverse
(R) position, the backup lamps light up and the
backup buzzer sounds simultaneously.
<Automatic transmission vehicles>
The range selector lever is used to select gear
ranges. Select lever positions carefully to ensure
proper engagement of each gear.
1 Using the range selector lever
: While depressing the brake pedal, push the
button and move the range selector lever.
The lever cannot be moved unless the
starter switch is in the “ON” position.
: Push the button and move the lever.
: Move the lever without pushing the button.
Range selector lever
Z18275
Z11851
Button
FE_FG.book Page 14 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
