- 2 -
2. SPECIFICATIONS
Machine model : PLK-E2010R
Sewing area : X Direction (left/right) 200mm
Y Direction (forward/backward) 100mm
Maximum sewing speed : 2,300 S.P.M. (up to 4mm stitch length)
Sewing speed : 10 steps variable from 200 S.P.M. to 2,300 S.P.M.
Stitch speed : Adjustable from 0.1mm to 12.7mm by 0.1mm resolution.
Stitch length : Adjustable from 0.1mm to 12.7mm by 0.1mm resolution.
Stitch type : Single needle lock stitch.
Needle bar stroke : 40mm
Thread take up lever stroke : 72mm
Class of needle : DP X 17 #18 (standard specification)
Wiper system : Back to forth wiping system (standard)
Work holder lift *1 : 25mm (max.)
Stepping foot stroke *2 : Variable from 4mm to 10mm (4mm is standard)
Hook : Large size rotating hook.
Bobbin case : With non racing spring.
Bobbin : Large size steel bobbin.
Thread trimmer system : arc engagement with fixed knife and movable knife
Lubrication system : Manual oiling and replenishment with the oil braids from the oil tanks.
Lubrication oil*3 : White machining oil.
Machine dimension : 1, 200mm(W) x 920mm(L) x 1, 170mm(H)
Steel stand : T-shape steel stand for standing or sitting operation.
Drive source pneumatic pressure : Primary side 0.5MPa (5kgf/cm
2
)
Secodary side 0.4MPa (4kgf･cm
2
)
Weight : 136kg (total net weight).
*1 Stepping foot lift means the clearance between the bottom of the stepping foot and the surface of the
sliding plate when the sewing machine is stopped.
*2 Stepping foot stroke means the vertical movement of the stepping foot during the sewing operation.
To Next Page
Loading...
Need help?
General
