Motorola AP-51XX User Manual

AP-51xx Access Point Product Reference Guide
6-62
5. Click OK to securely exit the Detail screen and return to the Active APs screen.
6. Click Cancel (if necessary) to undo any changes made and return to the Active APs screen.
6.13.2 Using MUs to Detect Rogue Devices
The access point can use an associated MU that has its rogue AP detection feature enabled to scan
for rogue APs. Once detected, the rogue AP(s) can be moved to the list of allowed devices (if
appropriate) within the Active APs screen. When adding an MU’s detection capabilities with the
access point’s own rogue AP detection functionality, the rogue detection area can be significantly
extended.
To use associated rogue AP enabled MUs to scan for rogue APs:
1. Select Network Configuration -> Wireless -> Rogue AP Detection -> MU Scan from
the access point menu tree.
The On Demand MU Scan screen displays with associated MUs with rogue AP detection
enabled
Detection Method Displays the RF Scan by MU, RF On-Channel Detection or RF
Scan by Detector Radio method selected from the Rogue AP
screen to detect rogue devices. For information on detection
methods, see Configuring Rogue AP Detection on page 6-55.
First Heard
(days:hrs:min)
Defines the time in (days:hrs:min) that the rogue AP was initially
heard by the detecting AP.
Last Heard
(days:hrs:min)
Defines the time in (days:hrs:min) that the rogue AP was last heard
by the detecting AP.
Channel Displays the channel the rogue AP is using.

Motorola AP-51XX Specifications

General

Brand	Motorola
Model	AP-51XX
Category	Wireless Access Point
Language	English