Motorola AP-51XX User Manual

AP-51xx Access Point Product Reference Guide
4-6
7. Click Logout to securely exit the access point Access Point applet. A prompt displays
confirming the logout before the applet is closed.
4.2 Adaptive AP Setup
An access point needs settings defined to discover (and adopt) an available switch and establish a
connection and data tunnel. It’s through this switch adoption that the access point receives its
adaptive AP (AAP) configuration. With the 2.0 access point firmware release, a new screen has been
added to define the mechanisms used to adopt a switch and route AAP configuration information
.
To configure the access point’s switch discovery method and connection medium:
1. Select System Configuration -> Adaptive AP Setup from the menu tree.
NOTE For an AAP overview and a theoretical discussion of how an access point
discovers a switch to creates a secure data tunnel for adaptive AP
operation, see Adaptive AP on page 10-1.
NOTE AAP functionality is only supported on a Motorola WS5100 model switch
(running firmware version 3.1) or higher and a Motorola RFS7000 model
switch (running firmware version 1.1 or higher).
NOTE The Adaptive AP Setup screen does not display the AAP’s adoption status
or adopted switch. This information is available using the access point’s
CLI. To review AAP adoption status and adopted switch information, see
AP51xx>admin(system.aap-setup)>show on page 8-149.

Motorola AP-51XX Specifications

General

Brand	Motorola
Model	AP-51XX
Category	Wireless Access Point
Language	English