8-17
8.3.1.1 Network LAN, Bridge Commands
AP51xx>admin(network.lan.bridge)>
Description:
Displays the access point Bridge submenu.
For an overview of the access point’s mesh networking options using the applet (GUI), see Configuring Mesh Networking on page 9-1.
show Displays the mesh configuration parameters for the access point’s LANs.
set Sets the mesh configuration parameters for the access point’s LANs..
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.