System Configuration
The access point contains a built-in browser interface for system configuration and remote
management using a standard Web browser such as Microsoft Internet Explorer, Netscape Navigator
or Mozilla Firefox (version 0.8 or higher is recommended). The browser interface also allows for
system monitoring of the access point.
Web management of the access point requires either Microsoft Internet Explorer 5.0 or later or
Netscape Navigator 6.0 or later.
To connect to the access point, an IP address is required. If connected to the access point using the
WAN port, the default static IP address is 10.1.1.1. The default password is “
motorola.” If connected
to the access point using the LAN port, the default setting is DHCP client. The user is required to know
the IP address to connect to the access point using a Web browser.
NOTE For optimum compatibility, use Sun Microsystems’ JRE 1.5 or higher
(available from Sun’s Web site), and be sure to disable Microsoft’s Java
Virtual Machine if installed.
To Next Page
Loading...
Need help?
General
