Getting Started
3-7
The export function will always export the encrypted Admin User password. The import
function will import the Admin Password only if the access point is set to factory default. If
the access point is not configured to factory default settings, the Admin User password WILL
NOT get imported.
.
3.5.1 Configuring Device Settings
Configure a set of minimum required device settings within the Quick Setup screen. The values
defined within the Quick Setup screen are also configurable in numerous other locations within the
menu tree. When you change the settings in the Quick Setup screen, the values also change within
the screen where these parameters also exist. Additionally, if the values are updated in these other
screens, the values initially set within the Quick Setup screen will be updated.
To define a basic access point configuration:
1. Select System Configuration -> Quick Setup from the menu tree, if the Quick Setup
screen is not already displayed.
2. Enter a System Name for the access point.
NOTE Though the access point can have its basic settings defined using a
number of different screens, Motorola recommends using the access
point Quick Setup screen to set the correct country of operation and
define its minimum required configuration from one convenient location.
To Next Page
Need help?
General
