AP-51xx Access Point Product Reference Guide8-12
8.3.1 Network LAN Commands
AP51xx>admin(network.lan)>
Description:
Displays the LAN submenu. The items available under this command are shown below.
For an overview of the LAN configuration options using the applet (GUI), see Configuring the LAN Interface on page 5-1.
show Shows current access point LAN parameters.
set Sets LAN parameters.
bridge Goes to the mesh configuration submenu.
wlan-mapping Goes to the WLAN/Lan/Vlan Mapping submenu.
dhcp Goes to the LAN DHCP submenu.
type-filter Goes to the Ethernet Type Filter submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.