Motorola MC1000 User Manual

Maintenance and Troubleshooting 4 - 5
Four Slot USB Cradle
Table 4-3 Troubleshooting the Four Slot USB Cradle
Symptom Possible Cause Action
Charge LEDs do not
light when mobile
computer is inserted.
Cradle is not receiving power. Ensure the power cable is connected securely to both
the cradle and to AC power.
Mobile computer is not seated
correctly in the cradle.
Remove and re-insert the mobile computer into the
cradle, ensuring it is firmly seated.
Extreme battery temperature. Li-ion battery does not charge if battery temperature is
below 32°F (0°C) or above 104°F (40°C).
Mobile computer
battery is not
charging.
Mobile computer was removed
from cradle or cradle was
unplugged from AC power too
soon.
Ensure cradle is receiving power. Ensure mobile
computer is seated correctly. If a mobile computer
battery is fully depleted, it can take up to four hours to
fully recharge the Li-ion battery.
Li-ion battery is faulty. Verify that other batteries charge properly. If so,
replace the faulty battery.
Mobile computer is not fully
seated in the cradle.
Remove and re-insert the mobile computer into the
cradle, ensuring it is firmly seated.
Extreme battery temperature. Li-ion battery does not charge if battery temperature is
below 32°F (0°C) or above 104°F (40°C).
During data
communications, no
data was transmitted,
or transmitted data
was incomplete.
Mobile computer removed from
cradle during communications.
Replace mobile computer in cradle and retransmit.
Incorrect cable configuration. See the system administrator.
Communications software is not
installed or configured properly.
Perform setup as described in the MC1000
with
Windows CE 5.0
Integrator Guide.

Motorola MC1000 Specifications

General

Brand	Motorola
Model	MC1000
Category	Handhelds
Language	English