Getting Started
26
PRELIMINARY
Turning Your Phone On and Off
Turning your phone On
1. Press and hold õ for more than 1 second. (Your phone number appears
briefly on the display and you hear a beep.)
• A greeting, the day of the week, month, date and time appear on the display.
• Your phone allows you to change the greeting that appears on the display.
“Change Banner” on page 72 provides more information about changing your
greeting.)
2. If the phone lock is activated, your phone will prompt you to enter the four-digit
lock code.
3. After you enter your lock code, your phone is in standby state. (The factory
default code is 0000, and that is what your phone accepts until it is changed.)
4. Calls may be placed to the emergency numbers programmed into your phone
such as 911 (USA), or 190 (Brazil), etc.,.You can also receive calls.
Dual Band/Dual Mode Operation
To make a best use of available signals, your phone can operate on both CDMA
digital and analog systems. If your phone finds a CDMA digital system, the time,
date and the
J ICON are displayed. If your phone finds an analog system, you
will not see the
J ICON.
1037B75-English.book Page 26 Tuesday, April 24, 2001 11:41 AM
To Next Page
Loading...
Need help?
General
