AWARD
®
BIOS Setup
3-23
Power Management Setup
IPCA function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Enabled. Settings: Enabled and
Disabled.
Power Management
Press <Enter> and the following sub-menu screen will appear:
Power Management
This item is used to select the degree (or type) of power saving and is
related to these modes: HDD Power Down, Doze Mode and Suspend
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Power Management Setup
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
IPCA function Enabled
Power Management Press Enter
ACPI Sleep Type S1(POS)
PM Control by APM Yes
Video Off Option Suspend --> Off
Video Off Method V/H SYNC+Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant-Off
State After Power Failure Auto
LED In Suspend Blink
Wake Up Events Press Enter
Item Help
Menu Level 8
8
8
Power Management
Power Management User Define
HDD Power Down Disable
Doze Mode Disable
Suspend Mode Disable
Item Help
Menu Level 88
To Next Page
Loading...
Need help?
General
