Installing Drivers
4-3
Driver Installation for Windows
®
2000
Installing VIA
®
Chipset Driver
1. Insert the supplied CD disk into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Click on Via Chipset Drivers and follow the on-screen instructions
to complete the installation.
4. Restart the system for the new chipset driver.
Installing VIA
®
AC97 PCI Sound Driver
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click the CD-ROM icon. The setup
screen will appear again.
3. Click on VIA AC97 PCI Sound Drivers and follow the on-screen
instructions to complete the installation.
4. Restart the system.
Note: Before installation of VIA chipset driver, you should install Win-
dows 2000 Service Pack2 or the latest version.
One Touch Setup:
In Windows 2000, you may see the One Touch Setup button appear
on the setup screen. Choosing the button will help you to install
more than one driver into the system without going through the
installation process step by step and save a lot of time
accordingly. After clicking on One Touch Setup, a window will
show up indicating what drivers will be installed. Install other
drivers not included by One Touch Setup manually if any.
To Next Page
Loading...
Need help?
General
