MSI MS-6378 ATX User Manual

AWARD
®
BIOS Setup
3-17
Integrated Peripherals
↑ ↓ → ←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
OnChip IDE Channel0 Enabled
OnChip IDE Channel1 Enabled
IDE Prefetch Mode Enabled
Primary Master PIO Auto
Primary Slave PIO Auto
Secondary Master PIO Auto
Secondary Slave PIO Auto
Primary Master UDMA Auto
Primary Slave UDMA Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
Init Display First PCI Slot
onboard Lan Device Enabled
IDE HDD Block Mode Enabled
Onboard FDD Controller Enabled
Onboard Serial Port 1 Auto
Onboard Serial Port 2 Disabled
UART 2 Mode Standard
IR Function Duplex Half
TX, RX inverting enable No, Yes
Onboard Parallel Port 378/IRQ7
Onboard Parallel Mode Normal
ECP Mode Use DMA 3
Parallel Port EPP Type EPP1.9
Onboard Legacy Audio Enabled
Sound Blaster Disabled
SB I/O Base Address 220H
SB IRQ Select IRQ 5
SB DMA Select DMA 1
MPU-401 Disabled
MPU-401 I/O Address 330-333H
Game Port (200-207H) Enabled
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Integrated Peripherals
Item Help
Menu Level 8
x
x
x
x
OnChip IDE Channel0/1
The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Choose Enabled to activate each channel separately.
IDE Prefetch Mode
The onboard IDE drive interfaces supports prefetching, for faster drive
accesses. Set to Disabled if your primary and/or secondary add-in IDE
interface does not support prefetching.
x

MSI MS-6378 ATX Specifications

General

Brand	MSI
Model	MS-6378 ATX
Category	Motherboard
Language	English