Chapter 3
3-32
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk
This item is used to auto detect the DIMM/PCI slots. When set to Enabled,
the system will remove (turn off) clocks from empty DIMM/PCI slots to
minimize the electromagnetic interference (EMI). Settings are Enabled and
Disabled.
Spread Spectrum Modulated
This item is used to enable or disable the clock generator’s Spread Spectrum
feature. When overclocking the processor, always set it to Disabled.
Settings are Disabled and Enabled.
CPU Host/PCI Clock
This item specifies the clock frequency of CPU host bus (FSB) and PCI bus
and provides a method for end users to overclock the processor
accordingly. If the item shows Default, the clock frequency will use the
default value for both the CPU host bus and PCI bus.
↑ ↓ → ←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Modulated Enabled
CPU Host/PCI Clock Default
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
Item Help
Menu Level 8
To Next Page
Loading...
Need help?
General
