Installing Drivers
4-3
VIA
®
Chipset
The MS-6378 is paired with the VIA
®
Apollo KLE133 chipset. Highly
advanced, the chipset combines an integrated 2D/3D engine with DVD
hardware acceleration, AC-97 audio support for SoundBlaster Pro and FM
synthesis legacy audio.
Features
AC’97 audio support for SoundBlaster Pro
FM synthesis legacy audio
2D/3D Graphics Accelerator
Support AGP 2X/4X Bus
VIA Chipset Driver Installation
Insert the provided CD disk into the CD-ROM drive. The CD will
auto-run and display “VIA Chipset Drivers,” “VIA KLE/PLE133 VGA
Driver,” “VIA AC’97 PCI Sound Drivers” and “Realtek Network Drivers” on
the screen. Click on the appropriate button for installation.
Installation for Windows
®
98SE
1. Insert the CD disk into the CD-ROM drive
2. The CD will auto-run and the setup screen will appear.
3. Click on the “VIA Chipset Drivers” and the screen will show “VIA
Service Pack 4.XX.”
4. Click “Next” and the screen will show four drivers “VIA Atapi Vendor
Support Driver,” “AGP VxD Driver,” “VIA Chipset Function’s
Registry” and “IRQ Routing Miniport Driver”. Select all four drivers
and click on “Next”.
5. The setup program will request you to choose “Install VIA Atapi
Vendor Support Driver”. Please select “Install” and click “Next” to
continue.
6. Click to enable DMA Mode, Please select “Install” and click “Next”
to continue.
7. The setup program will request you to choose “Install VIA AGP VxD
in turbo mode”, “Install VIA AGP VxD in normal mode” or “Uninstall
VIA AGP VxD”. Please select “Install VIA AGP VxD in turbo mode”
To Next Page
Loading...
Need help?
General
