National Instruments cDAQ-9133 User Manual

1-44 | ni.com
Chapter 1 Getting Started with the cDAQ Controller
Using the cDAQ Controller
The cDAQ controller consists of four parts—C Series module(s), the cDAQ module interface,
the STC3, and the processor—as shown in Figure 1-28. These components digitize signals,
perform digital-to-analog conversions to generate analog output signals, measure and control
digital I/O signals, and provide signal conditioning.
Figure 1-28. Block Diagram
Keyboard and Mouse 779660-01 All
USB CD/DVD Drive 778492-01 All
NI TSM 1012 Touch Screen Monitor (12 in.) 783635-01 All
NI TSM 1015 Touch Screen Monitor (15 in.) 783636-01 All
NI TSM 1017 Touch Screen Monitor (17 in.) 783637-01 All
* To comply with compliance guidelines in Korea, users should use the PS-16 power supply instead of
the PS-15.
Table 1-10. Cables and Accessories (Continued)
Accessory Part Number cDAQ Controller
C Series
I/O Module 1
C
Series
I/O Module x
cDAQ Mod
ule
Interface
STC3
NI-XNET
CAN/LIN
(NI cDAQ-9134/9135)
PFI 0
cDAQ-9132/9133/9134/9135/9136/9137
Processor
RS-232Ethernet
Mini
DisplayPort
USB

National Instruments cDAQ-9133 Specifications

General

Brand	National Instruments
Model	cDAQ-9133
Category	Controller
Language	English