© National Instruments | 1-13
cDAQ-9185/9189 User Manual
Figure 1-8. Adding the cDAQ Chassis to the Real-Time Controller in MAX
11. If the cDAQ chassis is not reserved automatically, select the chassis and click the Reserve
Chassis button. Refer to the Reserving the Chassis in MAX section for more information.
After the chassis is reserved by the real-time controller, the modules in the chassis are
visible in the MAX configuration tree.
Figure 1-9. Reserved cDAQ Chassis View in MAX
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
