National Instruments cDAQ-9185 User Manual

1-34 | ni.com
Chapter 1 Getting Started with the cDAQ Chassis
Firmware
Firmware can be updated through NI MAX or the web interface to the chassis. For cDAQ
firmware information and updates, visit
ni.com/info and enter the Info Code cdaqfw.
For the licensing disclosures document, go to ni.com/info and enter the Info Code
cdaqfoss.
Cables and Accessories
Table 1-7 contains information about cables and accessories available for the cDAQ chassis.
For a complete list of cDAQ chassis accessories and ordering information, refer to the pricing
section of the NI cDAQ-9185/9189 product page at
ni.com.
Removing Modules from the cDAQ Chassis
Complete the following steps to remove a C Series module from the cDAQ chassis.
1. Make sure that no I/O-side power is connected to the module. If the system is in a
nonhazardous location, the chassis power can be on when you remove modules.
2. Squeeze the latches on both sides of the module and pull the module out of the chassis.
Table 1-7. Cables and Accessories
Accessory Part Number
cDAQ
Chassis
NI PS-15 power supply (24 VDC, 5 A,
100 to 120/200 to 240 VAC input, -25 to 70 °C)
781093-01 cDAQ-9185
cDAQ-9189
NI PS-9 desktop power supply
(12 VDC, 1.25 A, 100 to 240 VAC input, 0 to 70 °C,
derated 0.27 W/°C above 40 °C)
780703-01 cDAQ-9185
cDAQ-9189
NI 9901 desktop mounting kit 779473-01 cDAQ-9185
cDAQ-9189
NI 9904 panel mount kit 779097-01 cDAQ-9185
NI 9905 panel mount kit 779558-01 cDAQ-9189
NI 9912 DIN rail mounting kit 779019-01 cDAQ-9185
NI 9915 DIN rail mounting kit 779018-01 cDAQ-9189
2-pos screw terminal kit for power supply
connection, qty 4
780702-01 cDAQ-9185
cDAQ-9189
CAT-5E Ethernet cable, shielded,
(2 m, 5 m, and 10 m lengths)
151733-02/05/10 cDAQ-9185
cDAQ-9189
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

National Instruments cDAQ-9185 Specifications

General

Brand	National Instruments
Model	cDAQ-9185
Category	Chassis
Language	English