About This Manual
This manual describes how to use the National Instruments
6510, 6511, 6512, 6513, 6514, 6515, 6516, 6517, 6518, and
6519 data acquisition (DAQ) devices with NI-DAQ 7.3 or
later. If you have not already installed the DAQ device,
refer to the DAQ Getting Started Guide for installation
instructions.
Related Documentation
The following documents contain information that you may find helpful as you use this help file:
• NI 651x Specifications—This document contains
specifications for the NI 6510, NI 6511, NI 6512, NI
6513, NI 6514, NI 6515, NI 6516, NI 6517, NI 6518,
and NI 6519 devices. It is available for download at
ni.com/manuals.
• DAQ Getting Started Guide—This guide describes
how to install the NI-DAQ software, the DAQ device,
and how to confirm that the device is operating
properly.
• NI-DAQmx Help—This help file contains information
about using NI-DAQmx to program National
Instruments devices. NI-DAQmx is the software you
use to communicate with and control NI DAQ devices.
• Measurement & Automation Explorer Help for
NI-DAQmx—This help file contains information about
configuring and testing DAQ devices using
Measurement & Automation Explorer (MAX) for
NI-DAQmx, and information about special
considerations for operating systems.
To Next Page
Loading...
Need help?
General
