© National Instruments | 2-31
RMC-8357 User Manual
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data security.
Please reboot your system for any change on the TPM state to take effect. The options are
Disabled and Enabled.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security device for
system data integrity. Your system will reboot to carry out a pending TPM operation.
The options are 0, Enable Take Ownership, Disable Take Ownership, and TPM Clear.
Note Your system will reboot to carry out a pending TPM operation.
Current Status Information
This item displays the status of the TPM support on this motherboard.
ACPI Settings
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and
provide a common infrastructure for the system to handle hardware errors within the Windows
OS environment to reduce system crashes and to enhance system recovery and health
monitoring. The options are Enabled and Disabled.
Event Logs
Use this feature to configure Event Log settings.
Change SMBIOS Event Log Settings
This feature allows the user to configure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Change this item to enable or disable all features of the SMBIOS Event Logging during system
boot. The options are Enabled and Disabled.
Runtime Error Logging Support
Select Enabled to support Runtime Error Logging. The options are Enable and Disable. If this
item is set to Enable, the following item will be available for configuration:
To Next Page
Loading...
Need help?
General
