2-36 | ni.com
Chapter 2 Installation and BIOS Setup
Add New Boot Option
This feature allows the user to add a new boot option to system boot priority features.
Add Boot Option
Use this item to specify the name of the driver that the new boot option is added to.
Path for Boot Option
This item is used to specify the path to the driver that the new boot option is added to. The format
for the path is fsx:\path\filename\efi.
Boot Option File Path
Create
After the driver option name and the file path are set, press <Enter> to enter to submenu and click
OK to create the new boot option drive.
Delete Boot Option
Use this item to select a boot device to delete from the boot priority list. Select the target boot
device to delete.
Save & Exit
Select the Save & Exit tab from the BIOS setup utility screen to enter the Exit BIOS Setup
screen.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
system configuration, and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes and Reset
When you have completed the system configuration changes, select this option to leave the
BIOS setup utility and reboot the computer, so the new system configuration parameters can
take effect. Select Save Changes and Exit from the Exit menu and press <Enter>.
Save Options
Save Changes
After completing the system configuration changes, select this option to save the changes you
have made. This will not reset (reboot) the system.
To Next Page
Loading...
Need help?
General
