NBB Compact-M2 R7 User Manual

37
Planar-D1 / Compact-M2 R7
DE
EN
IT
Commissioning
Voltage supply
1. Loosen the locking screw of the battery cover on the back of the transmitter.
2. Remove cover.
3. Insert 2 x AA batteries into the battery compartment.
4. Close the cover and retighten the locking screw.
– Completely charge the rechargeable battery before initial use.
– If the NBB radio control system is not to be used for a long time, we recommend
that you charge the battery occasionally (approx. every 4 weeks). This prevents
deep discharge of the battery and increases its service life.
– If you decommission the radio control system for a long time, we recommend
that you remove the batteries/rechargeable batteries from the transmitter!
Warning display
The depletion of the battery capacity is indicated by the rapid flashing of the letter
“L” on the display. From this point on, operation of the transmitter is still possible for
approx. 30 minutes.
n WARNING
Danger due to uncontrolled movements of the system to be controlled.
The system to be controlled becomes incapable of action for a certain period of time.
`
Put the system to be controlled in a safe position.
`
Insert a new rechargeable battery.
Energy saving function
If no keys are pressed within a specified time*, the transmitter automatically switches off.
The red dot in the LED or display goes out. Also available without standby as an option.
*The standby time can be set according to customer's requirements.
1. Loosen locking screw 2. Remove cover

NBB Compact-M2 R7 Specifications

General

Brand	NBB
Model	Compact-M2 R7
Category	Control Systems
Language	English