NEC A Series User Manual

© NEC Corporation 2019 35
4.7 Screen Configuration
Configuring a Screen via ViPlex Handy 4.7.1
Launch ViPlex Handy. Select Mode under Settings, and change the mode to Screen Step 1)
Configuration Mode.
Log in to the LED Poster (see 4.5). Step 2)
Click on the Screen name to enter the Screen management page. Step 3)
Select Screen Setting, Screen configuration to enter the Screen configuration. Step 4)
Configure screen information based on actual conditions and click OK. Step 5)

NEC A Series Specifications

General

Brand	NEC
Model	A Series
Category	Monitor
Language	English