NEC A Series User Manual

© NEC Corporation 2019 68
5.3.4.15 Configuring RF Synchronization (RF Management)
Set parameters related to RF synchronization and apply the parameters to time synchronization,
brightness synchronization, volume synchronization and environment monitoring data
synchronization.
Before using RF synchronization, install an RF module. ViPlex Express can detect and display RF
module status.
Click the Screen control menu button. Step 1)
Click the RF management function. Step 2)
Select the target terminal from the terminal list. Step 3)
Turn on RF synchronization. Step 4)
Set the current terminal as the master device or a slave device. Step 5)
Set a group ID. Step 6)
Enter the group ID of the master device for a slave device, and this slave device and
the master device will be grouped together.
Select the options that require RF synchronization.
Step 7)
After RF synchronization is applied, the time, brightness, volume and environment
monitoring data of the slave device will keep the same as the master device via RF
signal.
Click the Apply button to confirm the settings. Step 8)

NEC A Series Specifications

General

Brand	NEC
Model	A Series
Category	Monitor
Language	English