7-1
7. SHIPMENT SETTING
The monitor enters the factory mode by the procedure of "4.8.1 Factory mode", and sets the following items to an
initial value. When the setting is completed, "Factory preset" is executed by the OSD User menu.
Shipment Setting of Factory mode
Initial value Item
Analog Digital
Brightness for ECO MODE =OFF 100%
Brightness for ECO MODE =1 70%
Brightness for ECO MODE =2 20%
Contrast 50%
ECO MODE 1
DV MODE STANDARD
H. Position Depends on video mode. -
V. Position Depends on video mode. -
H. size Depends on video mode. -
FINE 0 -
Selection of color setting User color
RED 100%
GREEN 100%
BLUE 100%
Volume 50%
Mute OFF
Audio Lock out OFF
Expansion Depends on destination setting
OFF TIMER OFF
Input Resolution 1360 x 768 / 1680 x 1050
DDC CI ON
Signal Information ON
KEY Lock out OFF
Language Depends on destination setting
OSD Left/Right Center of screen
OSD Down/Up Center of screen
OSD Turn OFF 45 sec.
OSD LOCK OUT OFF
HOT KEY ON
USB LOCK OUT OFF
Carbon Savings 000.000kg
Initial message for ECO MODE condition Ready (Initial message for ECO MODE condition
appeared at first DC power on)
To Next Page
Loading...
Need help?
General